Choose Language: Japanese Korean Spanish Russian German French Portuguese Arabic Italian
我的账号 购物车
Product Categories

  • uploadfile/pic/VAMO-V5-1.jpg
  • uploadfile/pic/VAMO-V5-2.jpg
  • uploadfile/pic/VAMO-V5-3.jpg

Vamo V5是时尚,功能强大,性能可靠,功能齐全的可调压/可调功率MOD(最经典):
0.75" OLED液晶显示屏
可变电压:3- 6V.

 Vamo V5可调压/可调功率MOD  365ecig

颜色 不锈钢色 
库存数 1000 Piece
单价 ¥91.35
重量 198 g
浏览量 112052


 This is Body Only, not including the Li-ion battery and charger, if you want them, please come here: 18650/350 Battery|Charger     


The new Vamo V5 Variable Voltage/Wattage MOD is sleek, powerful, reliable, full VAMO V5 boxfeatured and very well built with the same features as the V3 but body of the V2. Voltage or Wattage is variable 3.0-6.0volts or 3.0-15.0watts respectively, using a single 18350 or with the included extension tube you can run a single 18650, or one/two 18350 lithium-ion rechargeable batteries, (all available separately). Check  atomizer/clearomizer/cartomizer resistance and battery voltage too with long press of the small buttons.   

        The new VAMO V5 Variable Voltage/Wattage MOD is single mode which provides RMS voltage monitoring. The RMS mode is more accurate because it samples the output Voltage repeatedly while it is powering an atomizer or cartomizer. With its 5 Amp output, it has ample power to run whatever device you want.  

       The buttons and settings are easy to figure out. This version has stainless buttons and easy to read OLED display. VAMO V5 Variable Voltage/Wattage MOD is completely compatible with the eGo series atomizers/cartomizers/clearomizers.




--1. Variable voltage - can be adjustable from 3.0V to 6.0V (in .1V increments).
--2. Variable wattage - can be adjustable from 3.0W to 15.0W (in .5W increments)
--3. 0.75" OLED display screen showing menu, function, selection and shows you remaining
battery life and how many "puffs" you have taken since last charging process.
--4. Maximum current output: 5A
--5. Check atomizer/clearomizer/cartomizer resistance(1.5-5.0ohm)
--6. Check voltage, wattage and current
--7.510/eGo threading connector, compatible with 510 and eGo threaded
atomizers/clearomizers/cartomizers with resistance (1.5-5.0ohm)
--8. Can be powered by 1*18350 battery/2*18350/1*18650 battery
--9. 5-click safety cutoff: Five clicks on main button, OLED screen displays" system: ON"
or "system: OFF". This is a very convenient option if you typically carry your electronic cigarette in your pocket or purse.
--10. Reverse battery protection, over current protection
--11. Thermal Monitoring shut the device off if it detects a high temperature condition.
--12. Time limit protection function
--13.Low voltage, low load (resistance) and short circuit warning
--14.Bottom vent hole




产品名称: VAMO V5 Variable Voltage/Wattage MOD
主体材料: Stainless Steel
直径: 22mm
长度: 135mm
Net 重量: 123gram (No include the Li-ion battery)
运输重量:198gram (with the package,no include the Li-ion battery)
电池容量:1*18350/2*18350/1*18650 Li-ion rechargeable battery


Please click for what suitable voltage to different the atomizer/ clearomizer/ cartomizer?


What atomizers/cartomizers can used in the VAMO V5 Variable Voltage/Wattage MOD?


The VAMO V5 Variable Voltage/Wattage MOD comes with 510/eGo threading connector, compatible with 510 and eGo threaded atomizers/clearomizers/cartomizers with resistance (1.5-5.0ohm). For examples: eGo-T atomizers, eGo CE4 cartomizers, eGo CE5 cartomizer , eGo CE6 cartomizer, eGo Mini Protank Glassomizer, eGo H2 Clearomizer, eGo-C atomizer, eGo-W cartomizers, 510 atomizers, eGo atomizers, 510 MEGA atomizer, eGo MEGA atomizers, 510 cartomizers, eGo cartomizers, eGo type A atomizers, Nautilus BDC Adjustable Airflow Clearomizer, ect.


How to use VAMO V5 Variable Voltage/Wattage MOD?


-1. On/Off: click the power button 5 times to turn on the VAMO V5 and 5 times again to turn off the VAMO V5.
--2. Set the control Panel:
Press and hold down the” +” and” - “ buttons at the same time for 5 seconds to enter the Menu. Press the “+” button, adjust the main menu, and press the “-” button adjust the submenu, 3 seconds without any operation to exit the menu.


VAMO V5 Control Panel


-3. Work: Screw and connect the eGo series atomizer/clearomizer(eGo, eGo-T, eGo-C, eGo-W CE4/CE5/CE6, Protank, H2, ect.) with the VAMO V5, then they will be stand-by state, it works only when you press the VAMO V5 power button. Press the power button and inhale at the same time.
--4. Low load: When the working resistance is under 1.2 Ohms, pressing the power buton, the LCD screen display “Low load”
--5. Low V: If the battery voltage is less than 3.2V, the LCD screen will display “Low V”
--6. Short out: When the VAMO V5 is short out, the LCD screen will display “ Short”
--7.Battery Charging:
The VAMO V5 can’t use an ego battery charger to charge. You should take out the 18350/18650 battery to charge. When the indicator light is red, the device is charging. When the light turns green, charging is complete.

Attention: It can not be charged from the battery screw.

How to set VAMO V5 function

Please click for what suitable voltage to different the atomizer/ clearomizer/ cartomizer?

VAMO V6 MOD电子烟套装(配KORE透明雾化器)
VAMO V6 MOD电子烟套装(配eTank透明雾化器)
克莱萠Cloupor30W MOD电子烟套装(配KORE透明雾化器)
克莱萠Cloupor30W MOD电子烟套装(配eTank透明雾化器)
LG HE4 18650 2500mAh 可充电电池 30A

Talk with me